Exterior Finishing: Vinyl / PVC
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designs
Formed at the juncture of dissimilar materials.
"F" Control Joint (with removable tape)
Recommended for smooth finishes
Removable tape protects deep "V" expansion slot during construction.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco
3/4" elongated vent holes.
"F" Series Control Joint and Vent
Designed to work on narrow overhangs
Where vents are needed to go against fascia or walls.
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.
Angle Casing Beads
Terminates stucco and plaster against doors, windows and other dissimilar materials
Provides a tapered transition.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco
3/4" elongated vent holes.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aesthetic
The slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to flow around the perimeter to assist…
Archmaker™ / Bandmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
With a reinforcing rib to assist in keying heavy material fills.
Archmaker™ Casing Bead
Designed to easily conform to most arched and curved designs
Works for curved bands on walls as well.
Archmaker™ Corner Bead
Provides true, uniform, curved, or arched reinforcement
Conforms to most arched and curved designs.
Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation line
To assist with moving moisture away from the wall.
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rod
BackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a caulk tray at the top of window and door…
BackerBead® with E-Flange™
Combination PVC Casing Bead with built-in closed cell backer rod
Factory-applied, closed-cell backer rod provides a sealed separation gap 1/4" wide where stucco abuts dissimilar materials such as the perimeter of window and door openings per…
BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gap
Assures efficient caulk seal for optimal moisture protection.
BackerBead® with Short Flange
Casing Bead with factory applied blue backer rod
BackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue backer rod with preset width and depth to…
Bandmaker™ Series Casing Bead
Designed with a reinforcing rib
Assists in keying heavy material fills when bands are used in architectural designs.
BM 66 Series 1-Piece Bandmaker™
Provides a one-piece band, saving labor time
Additional band widths available.
Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.
Conforms to most arched and curved designs.
Bullnose Corner Bead
3/4" radius bullnose provides hard-to-damage, rust-proof corners
Designed for use in high-traffic areas.
Bullnose X Corner Beads
3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returns
Designed for use in high-traffic areas.
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plaster
Terminates stucco and plaster against windows, doors and other dissimilar materials.
Casing Bead with Reveal
Designed to terminate stucco and plaster
At window or door openings to create a reveal.
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
CI Weep Track
Directs water drainage
Designed to be used with #1 Corner Bead around windows and doors and at the foundation line.
Colored Vinyl
Color Leadership
In addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealants
And to assist in alignment.
Connector Clips (for Control Joints)
Designed to assist in the alignment of control joints
And to provide a base for caulking.
Control Joint
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings
Flat flange for thinner, 1-Coat applications.
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings
Also creating 1/4" to 1-1/2" reveal in Stucco.
Control Joint with Removable Tape
Recommended for smooth finishes
Removable tape protects the deep "V" groove during construction. J-hooks on the ground help reduce plaster shrinkage.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.
DEFS "F" Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applications
Also controls cracking in large areas of walls and ceilings at the juncture of dissimilar materials. The removable tape creates a mask over the expansion…
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openings
Used as a backing for perimeter sealant application.
DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in DEFS applications
Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a clean…
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materials
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall board
For use in Direct-Applied Exterior Finish Systems (DEFS).
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations allow the base coat mixture to easily…
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in moving moisture away from the opening or the foundation walls.
DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in directing moisture away from the opening or the foundation walls.
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct moisture away from the substrate. Two rows of…
Double Flange Step Bead
Finish from the ground on both sides of the band
The grounds on both sides act as a guide for finishing smooth transitions. Perforated flanges allow for more secure attachment.
Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be used in combination with casing bead…
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation line
To assist with moving moisture away from the wall.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
DS15 Drip
Used with drip screed and as drip in special conditions
Such as soffits, balconies, etc.
E-Corner Bead
Fully Embedded Corner Bead
Provides reinforcement like welded-wire or woven wire laths.
E-Flange™ Bandmaker™ Casing Bead
PVC CASING BEAD WITH EMBEDDABLE FLANGE DESIGN
E-Flange Bandmaker™ Casing Bead is designed with a reinforcing rib to assist in keying heavy material fills when "bands" are used in architectural designs.
E-Flange™ Casing Bead
Designed to terminate stucco and plaster against doors, windows and dissimilar materials
Improves stucco embedment by more than 80% versus standard "flat flange" products.
E-Flange™ Casing Bead with Drip
E-FLANGE™ CASING BEAD with drip
PVC Casing Bead with embeddable flange design designed to terminate stucco and plaster with a moisture trap. ClarkDietrich E-Flange embeddable stucco profiles provide 80% more embedment than standard "flat…
E-Flange™ Control Joint
PVC Control Joint with Embeddable Flange design
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilings. Specially designed connector clips are provided for alignment and base for sealants.
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
EIFS/DEFS Control Joint w/Removable Tape
Designed to relieve stress caused by expansion and contraction in EIFS/DEFS applications
Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Extra Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standards
Miter cuts are made with precision to ensure proper fit at all connections.
FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
Inside Control Joint (with removable tape)
Designed to relieve stress caused by expansion and contraction
In wall and ceiling inside angles.
Irregular Leg Corner Bead
Provides damage-resistant, rust-proof, and straight corners
Designed with a shorter, 1-1/2" flange for narrow returns.
Large Flange Casing Bead
Terminates stucco and plaster against doors, windows and other dissimilar materials
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rod
Eliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the vinyl casing bead and set to the exact…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Prefabricated Panel Edge
Designed for systems that are manufactured into panels for job installation
Includes the ClarkDietrich Keylock™ Splice for connecting multiple sections and to assist in alignment in Exterior Insulation Finish Systems (EIFS) .
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with water managed systems.
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legs
Sloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture away from openings and foundation walls.…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing or blocking material behind surface…
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the soffit vents.
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent clips are provided for proper…
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit Vent
For stucco and plaster.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.
Standard Corner Bead
Provides hard-to-damage, rust-proof, and straight corners
Open triangles on the flanges allow for full embedment.
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beads
For Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond to the substrate for better embedment.
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior Insulation Finish Systems (EIFS).
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip leg
Designed with weep holes on the front side and a drip leg to move moisture away from openings in Exterior Insulation…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back side
Designed with weep holes on the back side to move moisture away from openings in Exterior Insulation Finish Systems (EIFS).
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side
Designed with weep holes on the front side to move moisture away from openings in Exterior Insulation Finish Systems (EIFS).
Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit vents
Connects multiple sections.
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to connect the soffit vent and to assist in…
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizes
Perimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered to allow incidental moisture to escape…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or blocking material behind surface-mounted…
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occur
Vent clips are provided to connect reveal sections and to assist in their alignment.
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in stucco plane transitions.
Weeped Starter Track
One-piece support starter track designed with weep holes and an extended drip leg
Moves moisture away from opening headers in Exterior Insulation Finish Systems (EIFS).
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Wide Flange Corner Bead